Biolase Soft Tissue Diode Laser - Epic X

Special Price ₹360,000 Regular Price ₹421,000
SKU
Soft Tissue Diode Laser - Epic X

Free Shipping

On Orders Over
₹ 2000

  •   COD Available Upto ₹ 10000
  •   Coupon Code will Auto Apply
  •   Coupon Code Only applied to Prepaid Payments
  •   3% Instant Discount From ₹ 2000 To ₹ 7999
  •   5% Instant Discount From ₹ 8000 To 14999
  •   8% Instant Discount From ₹ 15000 To 24999
  •   Flat ₹ 2000 Instant Discount From ₹ 25000 and above
Sold By
VitalTicks Store
4.5 / 5
  • Epic X features three distinct treatment modes access to Surgery, Pain Relief and Whitening procedures from a single device.
  • Highly designed by using smart technology, this laser serves you for long time with full functionality.
  • Create Whiter Smiles Faster
  • Provide Pain Relief Faster
  • Start and Finish Laser Surgeries Faster
  • Variety of Colors and Designs to Choose

 

More Information
Brand BIOLASE
Model Name/Number BIOLASE SOFT TISSUE LASER EPIC X
Wavelength 940 ± 10 nm
Dimension 14.5 x 11.2 x 16.5 mm
Weight 2.5 lb
Power Accuracy ± 20 %
Fiber Tips Diameter 200,300,400 μm
Pulse Duration 0.01 - 20 ms
Pulse Interval 0.04 - 20 ms
Battery Rechargeable 14.4 V, 2.9 mAh
General
Dimension :- 5.7 in (W) x 4.4 in (H) x 6.5 in (L) (14.5 cm x 11.2 cm x 16.5 cm)
Weight :- 2.5 lbs / 1kg
Aiming Beam :- Laser diode, max 1 mW, 625 nm – 670 nm

Electrical
Operating Voltage - 100V - 240V ~ at 1.5A
Frequency - 50/60Hz
External Fuses - None
Main Control - Power Switch
Remote Interruption - Remote Interlock
Disable Control - Emergency Stop Button
Battery - Lithium Ion Rechargeable, 14.4V, 2.9Ah
DC Power Supply Module - 12V DC, 5A

Laser Info
Laser Classification :- IV (4)
Medium :- InGaAsP Semi-conductor diode
Wavelength :- 940 ± 10nm
Max Power Output :- 10W
Power Accuracy :- ± 20%
Power Modes:- Continuous, Pulse Modulation
Fiber Tips Diameter:- 200μm, 300 μm, 400μm
Pulse Duration :- 0.01 ms – 20 ms
Pulse Interval :- 0.04 ms – 20 ms
Pulse Repetition Rate :- Up to 20kHz (for reference)
Surgical Handpiece :- 400 μm (maximum in contact mode)
Deep Tissue Handpiece :- 30 mm diameter = 7.1 cm2 area
Whitening Handpiece :- Rectangular 35 mm x 8 mm = 2.8 cm2
NOHD :- 4.77 meters
Beam Divergence :- 8 - 22° per side angle
Standard Fiber Cable Length :- 5 feet (1.524 meters)
  •  Can be used for laser therapy, faster than ever  
  • Maximum efficiency
  •  Laser Bleaching can be done in just 20 min
  •  EPIC X is cleared for temporary relief of minor pain, including pain associated with TMJ or other thermomandibular disorders
  •  EPIC X can energize your hygiene program quickly, with a number of easy-to-learn hygiene procedures at your fingertips
  • Plug the cord into the wall outlet for the device to be switched on. Turn the power switch at the rear of the console to the ON ( I ) position. The “BIOLASE” logo screen will appear. After three (3) seconds the Epic X “Welcome” screen will be displayed. Enter the three-digit access code using the touch screen. The access key code is 888 and waits 3 seconds to revert back to the Welcome screen, then re-enter the correct code. The system will go to the HOME screen which identifies three Procedure categories to choose from Soft Tissue, Whitening, Pain Therapy.
  • Verify that the Footswitch and laser console are paired; a blue LED indicator light on the laser console will blink when pairing is established. The laser and Footswitch are shipped already paired.
  • Pressing and holding the CONTROL button for approximately two (2) seconds will allow the transition from Standby or Ready mode to Sleep mode. Note that you will not be allowed to go into Ready mode unless you have chosen a treatment module on the HOME screen.
  • Pulse mode selection graphically indicates whether the system is in Continuous mode or in Pulse mode.
  • In Continuous mode, laser power is constantly delivered when the laser console is in Ready mode and the wireless Footswitch is activated.
  • In Pulse mode (CP0, CP1, CP2 &P3), laser power is delivered in repetitive pulses, controlled by the Pulse Length and Pulse Interval settings. Pressing the Pulse mode button will allow switching between Pulsed and Continuous modes.
  • For soft tissue procedures, press the “Soft-Tissue Icon” on the home screen, choose the procedure through the “Up” or “Down” button, and select.
  • For bleaching procedure, the program is pre-set in the device (7W, CW, 30 sec)for which dental bleaching handpiece along with LaserwhiteTM 20 Whitening Gel Kit is required.
  • For pain therapy, the default setting program in Epic X 2.75W, 10 minutes, with the spot size at 30mm. Power can be adjusted from 2.75W to 4W max, as appropriate, based on the Fitzpatrick Skin Type Scale. Always start at the lowest power setting and increase as necessary. 
1 Unit
3 Years of Warranty